Enter measurements

Wheel center bore

Car hub

Enter measurements → results appear here

Hub centric rings 57.1 → 54.1 mm Aluminium

ALUMINIUM

Wheel center bore 57.1 mm

Car hub 54.1 mm

Height 10 mm

Material Aluminium

Edge ~3 mm

Package size 4 pcs (1 set)

✅ In stock — ships within 24h!

💡 Also available in plastic ($19,99) →

$29,99 / set of 4

The following cars have a hub size of 54.1 mm. This hub centric ring fits when the wheel center bore is 57.1 mm.

Corolla E70 (1979–1983), E80 (1983–1987), E90 (1987–1992), E100 (1991–1997), E110 (1997–2001), E120 (2001–2006), E150 (2006–2013)
Yaris XP10 (1999–2005), XP90 (2005–2011), XP130 (2011–2020), XP210 (2020–)
Yaris Cross Yaris Cross (2021–)
Starlet KP60 (1978–1984), EP70 (1984–1989), EP80 (1989–1996), EP90 (1996–1999)
Celica RA/TA (1970–1977), RA/MA (1977–1981), RA/MA/SA (1981–1985), ST160 (1985–1989), ST180 (1989–1993), ST200 (1993–1999), ZZT230 (1999–2006)
Carina Carina II T170 (1987–1992)
MR2 AW11 (1984–1989), SW20 (1989–1999), ZZW30 (1999–2007)

Clean the hub

Clean the car hub and wheel center bore from dirt and rust. A dry, clean surface ensures a tight fit.

Place the ring on the hub

Press the hub centric ring onto the car hub. It should fit snugly — not too loose and not forced.

Mount the wheel

Lift the wheel into place. The wheel center bore sits on top of the hub centric ring, centering the wheel precisely on the hub.

Tighten the bolts

Tighten the wheel bolts/nuts in a cross pattern to the correct torque. The hub centric ring stays between the wheel and hub.

📏 How do I know the right size?

Measure your wheel center bore diameter (57.1 mm) and your car hub diameter (54.1 mm). See measuring guide →

📦 Shipping

Affordable letter delivery. In-stock products ship within 24h of order.

💬 Need help choosing?